How Is The Cold Hammer Applied To The Face During A Cavitation Treatment? Mastering The Lifting Technique

The cold hammer is applied using a specific sequence of outward, lifting strokes to soothe the face after heat treatments. You must glide the device along three distinct paths: from the chin to the ear lobe, from the corner of the mouth to the "ear gate" (the front of the ear), and from the nose wing to the temple. This cycle should be repeated back and forth three times for optimal results.

The cold hammer acts as a thermal counterbalance in a facial cavitation regimen. It is best used after Radio Frequency (RF) application to calm the skin, close pores, and lock in moisture through precise, repetitive lifting motions.

Proper Sequencing for Facial Treatment

Preparation is Key

Before touching the cold hammer to the skin, you must ensure the canvas is prepared. The face and neck should be thoroughly cleansed to remove makeup, dust, and grease.

The Role of Heat First

The cold hammer is not a standalone step; it follows the active treatment phase. Typically, you will apply toner and massage the face to relax muscles, then use the RF (Radio Frequency) handle with the appropriate cream.

The Cooling Transition

Once the heat-based RF treatment is complete, the cold hammer is introduced. This transition from heat to cold helps to firm the skin and reduce redness before the final step, which is usually the Photon Bio Brush.

Precise Application Technique

The Chin-to-Ear Stroke

Begin at the bottom of the face. Place the cold hammer on the chin and glide it smoothly along the jawline up to the ear lobe. This targets the lower face and jaw definition.

The Mouth-to-Ear Stroke

Move the device to the corner of the mouth. Glide it outwards and slightly upwards toward the "ear gate" (the area immediately in front of the ear canal). This targets the cheek area and nasolabial folds.

The Nose-to-Temple Stroke

Start at the wing of the nose. Sweep the device upwards and outwards across the cheekbone, ending at the temple. This movement helps to reduce puffiness under the eyes and lift the mid-face.

Repetition Strategy

Do not perform these movements randomly. You must repeat this specific pattern back and forth three times. This ensures uniform cooling and consistent coverage across the entire face.

Common Pitfalls to Avoid

Ignoring the Direction of Movement

Never drag the cold hammer downwards. The goal of the treatment is lifting and tightening; dragging the device down works against gravity and the desired lifting effect.

Incorrect Order of Operations

Do not use the cold hammer before the RF handle. The cold hammer constricts pores, while the RF treatment requires the skin to be receptive to heat and energy. Using cold first can inhibit the effectiveness of the RF stage.

Maximizing Your Facial Treatment Results

To ensure you are getting the most out of your cavitation device, align your technique with your specific treatment goals:

If your primary focus is skin tightening: Ensure you are applying the cold hammer immediately after the RF stage to "shock" the collagen into contracting and firming.
If your primary focus is reducing inflammation: Pay extra attention to the repetition of strokes, ensuring you complete the full three cycles to thoroughly cool sensitive areas.

Precision in movement and timing transforms the cold hammer from a simple accessory into a powerful tool for facial rejuvenation.

Summary Table:

Application Step	Movement Path	Repetitions	Primary Benefit
Lower Face	Chin to Ear Lobe	3 Cycles	Jawline definition & lifting
Mid Face	Corner of Mouth to Ear Gate	3 Cycles	Cheek lifting & fold reduction
Upper Face	Nose Wing to Temple	3 Cycles	De-puffing & mid-face lifting
Post-Care	Post-RF Application	Continuous	Redness reduction & pore closure

Elevate Your Clinic's Treatment Results with BELIS

Precision in technique requires precision in technology. BELIS specializes in professional-grade medical aesthetic equipment designed exclusively for clinics and premium salons. Whether you are looking to integrate advanced Radio Frequency (RF) systems, HIFU, or multi-functional Cavitation platforms, our equipment ensures your clients receive the highest standard of care.

Why Partner with BELIS?

Advanced Technology: From Diode Hair Removal and Pico lasers to EMSlim body sculpting.
Comprehensive Care: Specialized devices including Hydrafacial systems, skin testers, and Microneedle RF.
Professional Support: We provide the tools and expertise to help your business thrive in the competitive aesthetic market.

Transform your service offerings and deliver superior rejuvenation results. Contact us today to explore our full portfolio of medical-grade solutions!